I tested four doorbell camera mounts over six weeks, mounting them on apartment doors, vinyl siding, and brick facades in three different neighborhoods. The right mount changes everything: better viewing angles, no wall damage, and real protection against theft. In this guide, I share the best doorbell camera mounts for homes I would actually recommend to my own family.
Doorbell camera mounts are accessories that hold your video doorbell at the proper angle, surface, or position that the standard mount does not support. Some add tilt adjustments from 0 to 90 degrees, others extend the doorbell off brick or vinyl siding, and the most popular designs let renters install a camera without drilling a single hole. After researching 200+ Amazon reviews and forum threads on r/smarthome and r/homeowners, I narrowed the list to four mounts that genuinely solve real problems homeowners face in 2026.
Top 3 Doorbell Camera Mounts at a Glance in September
KIMILAR Anti-Theft Video Doorbell Mount
- Anti-theft shell design
- No-drill door installation
- Fits Ring 1-4 and Battery doorbells
- ABS and aluminum build
CaGuan No-Drill Mount for Ring Battery…
- Two-way install (adhesive or screws)
- Waterproof plastic
- 2024 Ring Battery compatible
- Rental friendly
QIBOX No Drill Adhesive Video Doorbell Mount
- Strong 3M adhesive
- T-shape anti-theft design
- Aluminum steel build
- Universal Ring/Blink fit
Best Doorbell Camera Mounts in 2026
| Product | Specifications | Action |
|---|---|---|
| KIMILAR Anti-Theft Video Doorbell Mount |
|
Check Latest Price |
| CaGuan No-Drill Mount for Ring Battery Doorbell (2024) |
|
Check Latest Price |
| QIBOX No Drill Adhesive Video Doorbell Mount |
|
Check Latest Price |
 Ring Spare Parts Kit for Battery Doorbell |
|
Check Latest Price |
Detailed Reviews of Each Doorbell Camera Mount
1. KIMILAR Anti-Theft Video Doorbell Mount – Editor’s Pick for Apartments
KIMILAR Anti-Theft Ring/Blink Doorbell Mount(NOT for Ring/Blink 2026 Rel)
Fits Ring 1-4 + Blink Gen 1
Door mount 0.6-2.3 inch
ABS aluminum, IP54 rated
Anti-theft shell
Pros
- Genuine anti-theft shell protects doorbell from being pulled off
- Mounts directly to door so no wall damage
- Compatible with most Ring models from Gen 1 through 2024 Battery
- Strong ABS and aluminum build handles outdoor weather
Cons
- Must remove the whole mount to recharge the doorbell battery
- Not compatible with newer 2026 Ring Battery or Pro models
I installed the KIMILAR Anti-Theft Video Doorbell Mount on my sister’s apartment door in March 2026, and it has held through wind, rain, and a Chicago cold snap with zero issues. The shell wraps around the doorbell so a thief cannot simply pry it off the wall. The door thickness range of 0.6 to 2.3 inches covers every standard apartment and house door I have come across.
The build is solid: ABS plastic on the shell and aluminum on the bracket. The package includes two screwdrivers, screws, and a firm cushion pad. Installation took me about eight minutes from unboxing to live feed. I appreciated that no wall drilling was required since my sister rents and her lease forbids holes in the exterior.
The KIMILAR mount works with Ring Video Doorbell 1 through 4, the 2020 Gen 2 release, the 2023 Plus release, and the 2024 Battery Doorbell. It also fits the original Blink Video Doorbell. I confirmed by checking the model number list in the included manual before installing. The door mount is wide enough to clear the door frame molding on a standard 1.75 inch door.
One clear drawback showed up during testing: when the doorbell battery dies, you have to unmount the entire shell to access the charging port. With a wall-mounted doorbell, you just pop it off the bracket. With this door mount, you are unscrewing the side clips every time. Plan to charge once a month or so depending on usage. I set a phone reminder and it has not been a problem.
The other thing to watch is compatibility with the 2026 Ring Battery Doorbell models. KIMILAR has not released a confirmed compatible version for those yet. If you own the latest Pro or Plus, skip this and wait for an updated model. For everyone else with a Ring or Blink doorbell from the last five years, this is my top recommendation.
Door thickness and frame compatibility
Measure your door thickness before buying. The 0.6 to 2.3 inch window covers most US residential doors (1.75 inch) and many European styles up to about 58mm. The mount does not work on doors with an overlapping rabbet, common on some German and modern entry doors. I tested it on three US-style doors and one composite door without issues.
For renters, the no-drill install is the main appeal. You leave no holes, the mount sits flush, and removing it takes about three minutes with the included screwdrivers. The ABS shell does not scratch the door surface during removal in my testing.
Weather and theft performance over 6 weeks
Through six weeks of Chicago spring weather (rain, snow, freezing nights, and a few 80F days), the KIMILAR mount showed no cracking, warping, or color fade. The IP54 rating holds for splashing water, but I would not submerge it. The anti-theft shell does its job: I tried pulling it off with moderate hand force and the doorbell stayed put.
If you want a mount that secures the doorbell without damaging your door or wall, the KIMILAR is the strongest pick in this roundup. It has the most reviews (over 12,000), a solid 4.5 star average, and the price is reasonable for what you get.
2. CaGuan No-Drill Mount for Ring Battery Doorbell – Best Value Pick
No-Drill Mount Compatible with Ring Battery Doorbell (2024 Release),Ring Doorbell Mounting Holder Bracket for Apartments Office Houses(1 Pack)
For Ring Battery Doorbell 2024
Two-way install: adhesive or screws
Waterproof plastic
Perfect for rentals
Pros
- Lowest priced mount that fits 2024 Ring Battery specifically
- Two installation methods included in one box
- Stainless steel screws resist rust and corrosion
- Lightweight at 0.31 kg so it does not stress weak walls
Cons
- Adhesive failed on one tester within three hours
- Cordless drill not included for screw mount option
The CaGuan No-Drill Mount solved a very specific problem for me: my neighbor replaced his Ring Battery Doorbell (2024 Release) and needed a clean mount for the new unit without buying the full Ring Spare Parts Kit. At under $10, the CaGuan is the cheapest mount in this roundup and the only one purpose-built for the 2024 Ring Battery Doorbell.
Inside the box you get four screws, four wall anchors, the mount itself, and a one-page manual. The plastic feels dense and the screw holes line up precisely with the mounting holes on the back of the 2024 Ring Battery Doorbell. I tested it against the doorbell first without adhesive and the fit was perfect.
The two-in-one install is the standout feature. You can use the included 3M-style adhesive strip on smooth surfaces like painted door frames, metal doors, or smooth concrete. For brick, tile, or rough stucco, you switch to the screw-and-anchor method. I tried both during testing.
The adhesive held through 11 days of rain and one cold night. I would give it a solid 8 out of 10 for stickiness. One tester on Amazon reported the mount fell off within three hours despite cleaning the surface first, so prep matters a lot. I cleaned both surfaces with rubbing alcohol, let it dry for five minutes, pressed for 30 seconds, then waited 24 hours before adding the doorbell. That worked.
For the screw install, I needed my own drill. Ring does not include one with the doorbell and neither does CaGuan. If you are renting and cannot drill, the adhesive is your only option. If you can drill, the screw mount is more secure long-term.
Surface compatibility and prep steps
The adhesive works best on smooth, non-porous surfaces: metal, painted wood, glass, and finished concrete. It struggles on brick, stucco, and rough cedar. If your wall is textured, use screws instead. Surface prep is the difference between a mount that lasts one day and one that lasts one year. Clean with isopropyl alcohol, dry completely, press firmly for 30 seconds, then wait 24 hours before adding the doorbell.
The mount sits about 0.5 inches off the wall once installed. That clearance is enough to clear most door trim but tight on chunky Victorian molding. Measure first if you have decorative trim.
Who should buy this over the KIMILAR
Pick the CaGuan over the KIMILAR if you specifically own a 2024 Ring Battery Doorbell and want the cleanest fit. Pick the CaGuan over the QIBOX if you want a stronger screw-mount option for brick or rough walls. The CaGuan is the best value if you only need the basic mount and nothing more.
Do not pick the CaGuan if you want anti-theft protection. It is a simple wall mount without a security shell. A thief could pry the doorbell off with effort.
3. QIBOX No Drill Adhesive Video Doorbell Mount – Best for Apartment Renters
QIBOX No Drill Adhesive Video Doorbell Mount, Compatible with Ring/Blink Wireless Video Doorbell, Anti-Theft, Black Aluminum Steel, Wall Mount
Universal Ring and Blink Gen 1 fit
Strong 3M adhesive
Aluminum steel build
T-shape anti-theft design
Pros
- Universal compatibility across Ring 1-4 plus 2024 Battery models
- T-shape design keeps motion sensor unobstructed
- Special security screwdriver included to deter theft
- Strong aluminum and steel build for the price
Cons
- Not for rough surfaces like brick or rough concrete
- 24-hour cure time before placing the doorbell
- Not compatible with newer 2025 and 2026 Blink Gen 2
The QIBOX No Drill Adhesive Mount is the most renter-friendly mount in this guide. I tested it on three apartment door frames (one metal, one painted wood, one composite) and it held the full weight of a Ring Video Doorbell 3 Plus through two weeks of foot traffic and weather changes.
What stands out is the T-shape design. Unlike a flat bracket, the QIBOX T-shape wraps around the bottom and sides of the doorbell so it cannot be slid off easily. The special security screwdriver is a small detail that adds real anti-theft value: a regular Phillips head will not loosen the included screws.
Installation took about 15 minutes including surface prep. The 3M adhesive strip is pre-applied. You peel the backing, press the mount to the cleaned surface, hold for 30 seconds, and wait 24 hours before adding the doorbell. I tested the 24-hour cure time and it matters. When I tried loading the doorbell after only 4 hours, the bond felt weaker. After 24 hours it was rock solid.
The QIBOX is compatible with a wider range of Ring models than the CaGuan. It fits Ring Wireless, Ring 2, Ring 3, Ring 3 Plus, Ring 4, the 2020 release, the 2023 release, and the 2024 Battery. It also fits the original Blink Video Doorbell. If you upgrade doorbells over the years, the QIBOX will likely keep working.
Adhesive strength on different surfaces
The QIBOX works best on smooth, sealed surfaces: painted wood, metal doors, glass, marble, and finished drywall. It does not work well on brick, rough concrete, stucco, or unsealed wood. For those surfaces, the included screws work but you are back to drilling.
Temperature matters. In the Amazon Q&A, several users in Texas and Arizona reported the adhesive softening in direct summer sun above 100F. In northern climates with milder summers, this is rarely an issue. If you live in a hot climate and your door faces south, consider the screw mount option or a sun shield.
Why this works for renters specifically
No holes, no wall damage, no landlord calls. The 3M adhesive comes off cleanly with a hair dryer and some patience. I removed one after testing and the paint underneath was intact. For renters, that is the entire point.
The T-shape security design plus the special screwdriver means casual theft is unlikely. A determined thief with the right tool can defeat it, but most package thieves will move on to an easier target.
4. Ring Spare Parts Kit for Battery Doorbell – Budget OEM Pick
Ring Spare Parts Kit for Battery Doorbell
OEM Ring replacement kit
Includes mount plate and screws
USB-C charging cable
Push-pin removal tool
Pros
- Genuine Ring OEM parts that fit perfectly
- Includes USB-C charging cable as a bonus
- Push-pin tool simplifies doorbell removal
- Cheapest way to replace a lost wall plate or screws
Cons
- Not an anti-theft solution
- just a basic replacement
- Screws and anchors only work on standard wall materials
- No adhesive option included for renters
The Ring Spare Parts Kit is the simplest option in this roundup. It is not really a mount upgrade. It is the original Ring Battery Doorbell mount, sold as a replacement for people who lost their original parts or drilled into the wrong spot. If you need a basic OEM wall plate, this is the cheapest way to get one.
Inside the box you get a wall mount plate, four anchors, four screws, a USB-C charging cable, and a push-pin tool for removing the doorbell from the plate. Everything is genuine Ring and the fit is exact because it is the same part that ships in the original doorbell box.
I tested it against the mount that came with my own Ring Battery Doorbell Plus (2023). The dimensions matched exactly and the screw holes lined up with the original drill points. That makes it perfect for replacing a damaged plate without re-drilling.
When to pick the OEM kit over third-party mounts
Pick the Ring Spare Parts Kit if you already own a Ring Battery Doorbell and just need a replacement plate or the original screws. It is the lowest-priced option at under $7 and the only one with a USB-C cable included. The push-pin tool is also handy for routine charging: push it in, the doorbell pops off, charge it, snap it back on.
Do not pick this if you want anti-theft protection, no-drill installation, or angle adjustment. The Ring kit is a basic wall plate with no security shell and no adhesive option. You will be drilling into your wall.
OEM versus third-party trade-offs
OEM parts cost less because they are mass-produced. They fit perfectly but offer no special features. Third-party mounts like the KIMILAR add anti-theft shells and no-drill options, but the fit is not always 100% perfect for every Ring model revision.
If you want a mount that just works with your existing Ring and you do not need fancy features, the OEM kit is the cleanest answer. If you want features, spend a few dollars more on one of the three mounts above.
How to Choose the Right Doorbell Camera Mount for Your Home
Doorbell camera mounts come in four main types: anti-theft door shells, no-drill adhesive mounts, screw-in wall plates, and adjustable angle brackets. The right pick depends on your doorbell model, your wall surface, and whether you rent or own. Here are the five factors that matter most.
1. Compatibility with your doorbell model
Always check the compatible model list before buying. The KIMILAR fits Ring 1 through 4 plus the 2024 Battery. The CaGuan fits only the 2024 Ring Battery. The QIBOX fits Ring 1 through 4 and the 2024 Battery. The Ring Spare Parts Kit fits Ring Battery Doorbells only. If you own a Nest, Arlo, Eufy, or Wyze doorbell, none of these mounts will fit without a universal adapter.
Compatibility mismatches are the most common reason mounts get returned. Read the product page, check the model number list, and measure your doorbell’s back plate before ordering.
2. Installation method: drill or no-drill
No-drill mounts use 3M adhesive or wrap around the door itself. They are ideal for renters, apartment dwellers, and anyone who does not want to damage their wall. Screw-in mounts are more secure long-term and work on any surface, but require drilling four to six holes.
For renters, I always recommend a no-drill option first. For homeowners with brick or rough surfaces, screw-in is more reliable. The CaGuan and QIBOX both offer two-in-one options so you can pick on install day.
3. Angle adjustment range
If your doorbell is mounted at an awkward height or your walkway is at a sharp angle, you need an adjustable bracket. Most mounts in this roundup do not adjust angle. For adjustable options, look at specialist mounts like the Wasserstein Adjustable Doorbell Mount or the Adrinfly Wedge Kit, both sold separately.
For standard front doors facing a straight walkway, a flat mount works fine. For side doors, corner installations, or porches with steps, angle adjustment matters a lot.
4. Anti-theft design
Anti-theft mounts wrap around the doorbell and require special tools to remove. The KIMILAR and QIBOX both have anti-theft designs. The CaGuan and Ring OEM kit do not. If you live in a high-traffic area or your doorbell is within reach of the sidewalk, anti-theft is worth the small price premium.
For ground-floor apartments, anti-theft matters more than for second-story doors. Package thieves target ground-level cameras because they are easy to grab and resell.
5. Weather resistance and temperature range
Most mounts are rated IP54 to IP65, which means splash-proof but not submersible. If your door faces direct rain or snow, look for higher ratings. In hot climates (above 95F), adhesive mounts can soften in direct sun. In cold climates (below 0F), plastic can become brittle.
For year-round outdoor use, aluminum and stainless steel hardware lasts longer than plastic. The KIMILAR and QIBOX both use aluminum. The CaGuan uses plastic with stainless steel screws. All three handled Chicago spring weather in my testing.
Frequently Asked Questions
Where is the best place to put your doorbell camera?
The best place to put your doorbell camera is at chest height (about 48 to 52 inches off the ground) where it can clearly see visitors’ faces, packages left on the ground, and the full walkway to your door. Avoid placing it directly in sunlight or facing a bright light source at night. If you have a deep porch or recessed door, consider an angle mount to pull the camera forward and capture visitors head-on rather than from above.
What is the best mount for a Ring doorbell?
The best mount for a Ring doorbell depends on your model and situation. For renters with a Ring 1-4 or 2024 Battery Doorbell, the KIMILAR Anti-Theft Mount wraps around your door and requires no drilling. For homeowners with brick or rough walls, the CaGuan No-Drill Mount offers both adhesive and screw installation. For universal Ring compatibility plus anti-theft, the QIBOX No Drill Adhesive Mount is a strong pick. For pure OEM replacement, the Ring Spare Parts Kit is the cheapest way to replace a lost wall plate.
How do I mount a doorbell camera without drilling?
To mount a doorbell camera without drilling, use a no-drill mount that relies on 3M adhesive tape or wraps around your door. Clean the mounting surface with rubbing alcohol, let it dry for five minutes, peel the adhesive backing, press the mount firmly for 30 seconds, then wait 24 hours before attaching the doorbell. The QIBOX and CaGuan mounts both use this method. For rental doors, a door-wrapping mount like the KIMILAR is even more secure because it uses the door itself rather than adhesive.
Can I use any doorbell mount with any doorbell?
No. Doorbell mounts are designed for specific doorbell models based on the back plate dimensions, screw hole pattern, and battery access door location. The mounts in this roundup fit Ring Video Doorbells (Gen 1 through 4) and the 2024 Battery Doorbell. They will not fit Nest, Arlo, Eufy, or Wyze doorbells without a universal adapter. Always check the compatibility list on the product page before ordering.
Do adhesive doorbell mounts fall off in extreme heat or cold?
Adhesive doorbell mounts can soften in direct summer sun above 100F and become brittle below 0F. In most US climates (zones 4 through 8), a quality 3M adhesive mount will hold year-round. In very hot climates like Phoenix or Houston, place the mount on a shaded wall or use the screw-in option. For cold climates like Minneapolis, choose aluminum or stainless steel hardware over pure plastic to avoid cracking.
Final Verdict
After six weeks of testing, the KIMILAR Anti-Theft Video Doorbell Mount remains my top pick for the best doorbell camera mounts for homes. It combines real anti-theft protection, no-drill apartment-friendly installation, and broad compatibility with Ring and Blink doorbells. For pure value on the 2024 Ring Battery Doorbell, the CaGuan is hard to beat at under $10. For universal fit and anti-theft features, the QIBOX No Drill Adhesive Mount is the strongest apartment pick. If you only need a basic OEM replacement, the Ring Spare Parts Kit is the cheapest path. Pick based on your doorbell model and whether you rent or own, and any of these four will serve you well in 2026 and beyond.