How to fix LED monitor problem
Buying electronics is easy, but maintaining them is more difficult. Various types of LED monitor problems often occur.
But you don’t have to worry because some problems that occur with LED monitors are usually something you can fix yourself. So what are the most common problems with LED monitors and how can you fix them?
1. Monitor LED blinks frequently
One of the problems that often occurs with LED monitors is that the screen suddenly flickers frequently. In this case you don’t have to worry. The computer has the maximum capacity for the monitor to display images in one second, which is called the refresh rate. If the screen suddenly flickers a lot, there may be a problem with the refresh rate setting, causing the frame rate to be too low.
How to deal with it is very simple. First click Display Properties, then click Settings. Second, click Advanced, select the Monitor tab. Third, you will see an option for refresh rate. Try a reasonable refresh rate until your monitor stops flickering. However, if this treatment was attempted and your LED monitor is still flashing, you should take it to a service provider immediately, yes.
2. Blurred LED monitor screen
Another common problem is that the LED monitor is fuzzy. Although it is not a serious problem, the blurry display of the LED monitor naturally disturbs your comfort. This usually happens with LED monitors that have a lifespan of more than three years. Prolonged use of the LED monitor may cause problems with the amplifier circuit. To solve this problem, please open the LED monitor case, and then fasten the video amplifier board with the grid plate.
3. Monitor LED does not light up
The next problem and the easiest to detect is when the LED on the monitor does not light up. If you pressed the power button but the LED monitor still won’t turn on, there are several solutions you can try. The most important thing is that you need to make sure that the power switch is in the on position.
First the solution when the monitor light is on. You can make sure that the video cable connecting the monitor to the processor is installed correctly. If the monitor’s LED does not turn on afterward, the problem may be related to the video signal on the CRT adapter board. Take it to the experts for further processing.
Second, a solution when the light does not turn on. You can make sure that the power cord of the wall outlet and the power cord of the monitor are connected correctly. If the LED monitor does not turn on after this, replace it with a different power cord.
4. Screen size mismatch
The fourth problem is that the screen size on the LED monitor does not match. This does not include font size, icons, menus, or any indicators that appear on the LED monitor. Too small or too large size will definitely make you feel uncomfortable when using the monitor. The cause is usually in the resolution of the LED monitor.
You can solve this problem in the following ways. First, right click on the desktop. Second click properties. Third, click Settings. Then you can change the resolution of the LED monitor as you need. If the displayed image is too small, you just need to increase the resolution of your LED monitor.
5. LED monitor color change
The last problem that is common with LED monitors is discoloration. This can happen because existing electronic devices create a magnetic field, causing a color change. Sometimes a blue spot may appear on the LED monitor. The way to fix this type of problem is to try to get the magnet closer to the corner of the LED monitor. You can also try using the degauss function in the monitor control menu.
These are 5 problems that are common in LED monitors. How to deal with it is quite simple and you can try to apply. However, if your damaged LED monitor does not return to normal, please contact an expert immediately for more serious treatment. Monitor problems are often caused by faulty hardware and therefore require special treatment. I hope this article will contribute to your understanding, okay!